New FX series

WHEN THE GOING GETS TOUGH…

New DAB FX.
Four hydraulic solutions for the lifting and transfer of domestic,
civil and industrial waste water for specialists.

Drainage Water

Effluent Water

Sewage Water

New FX series

THE TEAM THAT
ALWAYS SCORES.

Four completely innovative solutions for waste water;
four answers to your needs.

Design was carried out with absolute reliability and strength in mind.

FX

THE PLAYING FIELD

Tested in the most complex scenarios that involve the draining of sewage water, the new FX range comprises 4 lines certified for waste water according to standard EN 12050. They are also available with ATEX certification.

Residential building service

Suitable for pumping stations for
lifting and transfer of sewage and
drain water from residential or public buildings

Commercial building service

Suitable for the draining of car parks,
garages, roads below ground level
 and
environments prone to flooding.

Industrial service

Suitable for the transfer of
sewage water

from industrial processes.

tooltip text
tooltip text

GRINDER FX

Pumps with a high resistance stainless steal grinder system suitable for the transfer of sewage water at high pressure or when narrow piping is needed to keep down system installation costs.

tooltip text

DRENAG FX

Draining pumps with rubber coverings that limit wear due to the presence of sand or abrasive particles. Suitable for draining environments prone to flooding where high head is necessary.

tooltip text

FEKA FXV

Pump with patented super vortex impeller increase performance without compromising the ability to work in the presence of large solids and long fibres, guaranteeing a completely free passage.

tooltip text

FEKA FXC

Pumps with anti-clogging channel impeller. Suitable for drainage and the transfer of effluent and sewage water, containing solids up to 50mm with reduced long fibre content.

A STRONGER AND ROBUST RANGE

The double silicon carbide mechanical seals are entirely enclosed in the oil chamber to avoid direct contact with the pumped liquid.
The high standards of construction, including the motor shaft in anticorrosion stainless steel AISI 304, the external cataphoresis and twocomponent coating and the resin sealed cable gland, guarantee the long life of the range.

COMPACT MOTORS

DESIGNED TO INCREASE PERFORMANCE AND REDUCE RISKS

The new, compact motors are designed to increase the starting torque and reduce the risk of clogging. Now more efficient than ever, they allow the FX pumps to run even when not fully submerged to permit complete emptying of the tanks.

QUICK AND SIMPLE MAINTENANCE

The pumps in the FX range have a structure with three levels for quick access to all the main components, greatly facilitating maintenance. The spare parts have also been unified and made universal for the entire range.

FX Main Features

MAXIMUM RESISTANCE, GREAT RELIABILITY

Compact motors with high starting torques

to reduce the clogging

Double mechanical seal in the oil chamber

complete protected from the pumped liquid

Anti-leakage resin sealed cable gland

with fast connections

Delivery port both threaded and flanged

to increase the flexibility of installation

Condenser compartment easy to access

for inspection and maintenance

Anti-corrosion stainless steal motors shaft

AISI 304

Cataphoresis and two-component coating

to guarantee high resistance

Rubber disc for increasing stability

for the pump in mobile installations

HIGH EFFICIENCY,
DOUBLE THE SAVINGS

CFD ANALYSIS AND THE BENEFITS

The FX range tackles the issue of efficiency from every point of view. Advanced research into Computational Fluid Dynamic Analysis (CFD) has allowed us to improve performance in terms of efficiency and increase the capacity to manage sewage water. The FX range comes with high energy efficient motors that permit lower power ratings, these guarantee the same performance as a more powerful pump.

SUPER VORTEX AN EXCLUSIVE DAB PATENT

GREAT NEWS. GREATER VALUE.

The new Super Vortex impeller, patented by DAB, is an important development. Completely redesigned on the basis of research into computational fluid dynamics, the new impeller improves on the performance of the FEKA FXV pumps under all conditions, reducing motor consumption while still offering the benefit of a free passage the same size as the pump’s delivery port (50 and 65 mm).

FEKA FXV

FEKA FXC

GRINDER FX

DRENAG FX

PREVALENCE AND FLOW RATE

H MAX 18.5 m
Q MAX 900 l/min

H MAX 19 m
Q MAX 1200 l/min

H MAX 33 m
Q MAX 320 l/min

H MAX 32 m
Q MAX 510 l/min

Available powers and outlet

P2 kW Outlet
0.7-2.2 2″DN50
DN65
P2 kW Outlet
0.7-2.2 2″DN50
DN65
P2 kW Outlet
0.7-2.2 1″1/2
DN32
DN40
P2 kW Outlet
0.7-2.2 1″1/2
DN32
DN40

DCONNECT BOX 2

The DConnect Box 2 allows you to check the pump, set the starting and stopping parameters, view the details of alarms and monitor the pressure directly on your smartphone, while ensuring unprecedented performance and less maintenance than ever before (only for DTron 3).

Download DConnect

FX + DCONNECT: ALWAYS IN CONTACT WITH YOUR SYSTEMS

DConnect is the new DAB cloud service that allows you to remotely control your installations, in real time and wherever you are. Connectivity in the cloud with DConnect allows you to monitor activity of the FX pumps and receive updates on operation and alarms in order to anticipate the risk of malfunctions and seizing.

In case of replacement

NEW FX LINE:
THE ACE OF
REPLACEMENTS

 

A complete and wide range of technical features and performances;
a fast and effective solution in every replacement case.

  • Both flanged and threaded delivery ports
  • Adapters suitable for various types of connections
  • Fast disconnecting cable